Frank H. Sanders

Abstract:

Have you ever wondered how a spectrum analyzer works, how to properly adjust all of the analyzer's parameters, or why a stair-step pattern initially appears on a spectrum analyzer screen when you turn it on? Do you know how to precisely calculate the analyzer's sensitivity in your head, merely by glancing at the screen display without any signal present? Are you uncertain about how much gain, and how low a noise figure, you ought to specify when you are ordering a low–noise amplifier (LNA) for a radio receiver? Do you want to know the difference between noise figure and noise factor? Do you wonder how to diagnose and solve radio interference problems?

If you have questions about how to make good radio spectrum measurements or how to diagnose interference problems, you will find the answers in the NTIA Seminar Series on Spectrum Measurement Theory and Techniques. In this series of talks, an NTIA engineer at the Institute for Telecommunication Sciences (ITS) laboratory in Boulder, CO, discusses the fundamentals of radio spectrum measurements. The speaker, Frank Sanders, who has nearly thirty years of experience in this field, recognizes that even for many engineers who routinely use spectrum analyzers, the fundamentals of how they work and how to use them may be a bit murky; even in university lab classes the instructors do not always understand these machines very well themselves.

Most of the talks, which are 80–100 minutes long, are divided into two parts. In the first portion of each video, Sanders explores a particular aspect of radio spectrum measurement technique or theory with a whiteboard lecture. In the second part, the lessons of the whiteboard discussion are implemented with actual measurement hardware and radio signals. A few of the talks, which for example involve large numbers of photographs of radar systems, are videos of his Microsoft PowerPoint presentations.

In this series, Sanders explains spectrum analyzer functionality in terms of convolution bandwidth and shows how, when convolution is understood along with the mechanics of analyzer design, spectrum analyzer operations and outputs become easy to understand and use. Other topics include (1) what you need to know to use spectrum analyzers to examine all types of radio signals, including mobile radios, radars, and digital data links; (2) the use of low noise amplifiers and how to specify the right gain and noise figure for your receiver and measurement applications; (3) how radar systems work, and how to understand and interpret the signals that you see coming from radars; (4) the ways that radio interference can occur; (5) a methodical approach for diagnosing and solving radio interference problems; (6) the math needed to convert spectrum analyzer measurements into field strengths of radio signals; and (7) the proper conversions for radiation hazard calculations.

Talk 1: Thermal Noise Limits in Radio Measurements

Talk 2: Fundamentals of Spectrum Analyzer Design

Talk 3: Spectrum Analyzer Detection Modes

Talk 4: Measuring Signal Power and Field Strength Conversions

Talk 5: The Riis Equation: Optimizing Noise Filter and Dynamic Range

Talk 6: The Radar Equation: How To Build Your Own Radar

Talk 7: The Difficulty of Measuring Radar Emission Spectra

Talk 8: A Radar Spectrum Measurement System Design

Talk 9: Measuring Radar Emissions

Talk 10: Noise Diode Calibration of a Measurement System

Talk 11: Reviewing Radar Systems

Talk 12: Additional Specialized Spectrum Measurement Techniques

Talk 13: Methodologies and Results of NTIA Broadband Spectrum Surveys

Talk 14: Resolving RF Interference: Co-Channel Interference

Talk 15: Resolving RF Interference: RF Front-end Overload Problems

Talk 16: Resolving RF Interference: Miscellaneous Problems

Talk 17: Identifying Radar Signal Interference in Geostationary Satellites

Talk 18: RF Hazard Calculations & Measurements

Talk 19: Additional Spectrum Measurement Techniques

Talk 20: Spectrum Efficiency Studies of Radars

These talks are made available via the NTIA/ITS YouTube channel. The the full series playlist is here.

Keywords: spectrum measurements; radio interference; radio noise; convolution bandwidth; low noise amplifier (LNA); radar signals; radio signals; radio emission measurement; spectrum analyzer

Disclaimer: Certain commercial equipment, components, and software may be identified in this report to specify adequately the technical aspects of the reported results. In no case does such identification imply recommendation or endorsement by the National Telecommunications and Information Administration, nor does it imply that the equipment or software identified is necessarily the best available for the particular application or uses.

For questions or information on this or any other NTIA scientific publication, contact the ITS Publications Office at ITSinfo@ntia.gov or 303-497-3572.

Back to Search Results