IEEE Transactions on Broadcasting, 50, no. 3 (September 2004): 312–322
A New Standardized Method for Objectively Measuring Video Quality
doi: 10.1109/TBC.2004.834028Cite This Publication
Margaret H. Pinson and Stephen Wolf, “A New Standardized Method for Objectively Measuring Video Quality,” IEEE Transactions on Broadcasting 50, no. 3 (September 2004): 312–322 . http://dx.doi.org/10.1109/TBC.2004.834028
Margaret H. Pinson and Stephen Wolf
Abstract: The National Telecommunications and Information Administration (NTIA) General Model for estimating video quality and its associated calibration techniques were independently evaluated by the Video Quality Experts Group (VQEG) in their Phase II Full Reference Television (FR-TV) test. The NTIA General Model was the only video quality estimator that was in the top performing group for both the 525-line and 625-line video tests. As a result, the American National Standards Institute (ANSI) adopted the NTIA General Model and its associated calibration techniques as a North American Standard in 2003. The International Telecommunication Union (ITU) has also included the NTIA General Model as a normative method in two Draft Recommendations. This paper presents a description of the NTIA General Model and its associated calibration techniques. The independent test results from the VQEG FR-TV Phase II tests are summarized, as well as results from eleven other subjective data sets that were used to develop the method.
Keywords: video quality; image quality; objective testing; subjective testing
For technical information concerning this report, contact:
Margaret H. Pinson
Institute for Telecommunication Sciences
(303) 497-3579
mpinson@ntia.doc.gov
Disclaimer: Certain commercial equipment, components, and software may be identified in this report to specify adequately the technical aspects of the reported results. In no case does such identification imply recommendation or endorsement by the National Telecommunications and Information Administration, nor does it imply that the equipment or software identified is necessarily the best available for the particular application or uses.
For questions or information on this or any other NTIA scientific publication, contact the ITS Publications Office at ITSinfo@ntia.gov or 303-497-3572.