December 1983 | Technical Note NBS TN 1071
Design and Error Analysis for the WR10 Thermal Noise Standard
Cite This Publication
William C. Daywitt, “Design and Error Analysis for the WR10 Thermal Noise Standard,” Technical Note NBS TN 1071, U.S. Department of Commerce, National Telecommunications and Information Administration, Institute for Telecommunication Sciences, December 1983. http://dx.doi.org/10.6028/NBS.TN.1071
William C. Daywitt
Abstract: This note describes the design and error analysis of a WR10 thermal noise power standard. This standard is designed to operate at the boiling point of liquid nitrogen with a noise temperature output accurate to ± 1 K.
Keywords: millimeter wave; diffraction; antenna; error analysis; plane-wave scattering matrix; noise standard; antenna efficiency
Related Links:
Disclaimer: Certain commercial equipment, components, and software may be identified in this report to specify adequately the technical aspects of the reported results. In no case does such identification imply recommendation or endorsement by the National Telecommunications and Information Administration, nor does it imply that the equipment or software identified is necessarily the best available for the particular application or uses.
For questions or information on this or any other NTIA scientific publication, contact the ITS Publications Office at ITSinfo@ntia.gov or 303-497-3572.