April 1970 | Technical Memorandum TM ITS 229
A Peak FM Deviation Calibrator Graph
Cite This Publication
John J. Tary and T. Layne Livingston, “A Peak FM Deviation Calibrator Graph,” Technical Memorandum TM ITS 229, U.S. Department of Commerce, Environmental Science Services Administration, Institute for Telecommunication Sciences and Aeronomy, April 1970.
John J. Tary and T. Layne Livingston
Abstract:
Use of a decibel plot for the Bessel function makes it a simple task to obtain the single tone peak deviation of FM radio systems. The procedure offers ways to calibrate deviation meters, supplement the carrier disappearance technique, and check the linearity of a generated FM spectrum. These curves are particularly useful in the low deviation range, where the carrier disappearance technique gives unsatisfactory results. The measurement technique described requires only “off the shelf” test equipment.
Keywords: FM radio
Disclaimer: Certain commercial equipment, components, and software may be identified in this report to specify adequately the technical aspects of the reported results. In no case does such identification imply recommendation or endorsement by the National Telecommunications and Information Administration, nor does it imply that the equipment or software identified is necessarily the best available for the particular application or uses.
For questions or information on this or any other NTIA scientific publication, contact the ITS Publications Office at ITSinfo@ntia.gov or 303-497-3572.