Frank H. Sanders, Robert T. Johnk, and Edward F. Drocella Jr.

Abstract: This report describes emission spectrum and time domain measurements of a contraband wireless device micro-jammer that was operated temporarily in four Commercial Mobile Radio Service (CMRS) bands at a Federal Correctional Institution (FCI) at Cumberland, Maryland. The four jammed CMRS bands were between 730 MHz and 2.155 GHz. The micro-jammer targeted CMRS service indoors, in a single medium-security prison cell. Spectrum measurements of the jammer emissions were performed at two places inside the targeted prison cell and at two non-targeted nearby locations outdoors. Jammer emission measurements were performed at each location with multiple measurement bandwidths and detectors across a frequency range of 300 MHz to 4.34 GHz. Measurements at each location were performed twice, with the jammer device on versus off, so as to show the relative power levels of the jamming signal versus the ambient CMRS signals at each location. Aggregate emissions from multiple micro-jammer devices such as would be required to cover an entire prison facility were not measured. Jammer emissions are presented in units of power per unit bandwidth in measurement system circuitry; a table for conversion of those data to units of incident field strength in space is provided.

Keywords: electromagnetic compatibility (EMC); harmful interference; aggregate emissions; cellular communications jamming; denial-of-service jamming; emission bandwidth; radio jamming; in-band emissions; commercial mobile radio service (CMRS) jamming; communications jamming; micro-jammer; radiation hazard (radhaz); wireless device jamming

Disclaimer: Certain commercial equipment, components, and software may be identified in this report to specify adequately the technical aspects of the reported results. In no case does such identification imply recommendation or endorsement by the National Telecommunications and Information Administration, nor does it imply that the equipment or software identified is necessarily the best available for the particular application or uses.

For questions or information on this or any other NTIA scientific publication, contact the ITS Publications Office at ITSinfo@ntia.gov or 303-497-3572.

Back to Search Results