John Wesdock et al.

Abstract:

This handbook provides the radio frequency (RF) analyst with the capability to calculate the effects of noise and interference on RF communications receivers. A receiver is modeled as a sequence of modules. Each module has a transfer function that relates the module outputs to the module inputs. By consecutively analyzing each module in the sequence, the analyst can then relate the receiver outputs (performance) to the receiver inputs (signal characteristics).

A wide variety of communications modulation and coding techniques are considered for this handbook including Quadrature Phase Shift Keying (QPSK), Gaussian Minimum Shift Keying (GMSK), Orthogonal Frequency Division Multiplexing (OFDM), Low Density Parity Check Coding (LDPCC) and Turbo Product Coding (TPC). Interferers considered include continuous and pulsed narrow and broadband interferers which are on-tune, offtune and adjacent channel.

Keywords: interference; spread spectrum; bit error rate (BER); trace gas absorption; noise; OFDM; demodulator; forward error correction ; communications receiver; frequency-dependent rejection; FDR; FEC; BER; source decoder; LDPCC; TPC; GMSK

Disclaimer: Certain commercial equipment, components, and software may be identified in this report to specify adequately the technical aspects of the reported results. In no case does such identification imply recommendation or endorsement by the National Telecommunications and Information Administration, nor does it imply that the equipment or software identified is necessarily the best available for the particular application or uses.

For questions or information on this or any other NTIA scientific publication, contact the ITS Publications Office at ITSinfo@ntia.gov or 303-497-3572.

Back to Search Results